A visual inspection of your facility may reveal electrical problems but by the time those problems are viewable with the naked eye they could have already caused damage and cost your firm money and downtime. That is why thermal imaging is so critical. It allows us to see things that the naked eye cannot. So before an electrical problem turns critical we can find it and fix it avoiding costly down time, equipment damage and potential safety issues.
Here are some of the kinds of issues our thermal imaging scan can reveal:
• Faulty Terminal Wires
• Damaged Jumper Wires
• Faulty Disconnects
• Loose or Over Tightened Wire Connections
• Over Heating Pump Bearings
• Faulty Motor Bearings
• Breaker Problems
• Broken or Undersized Wires
• Faulty Insulation
• Fuses Over Their Current Capacity
• Overheating Fuse Clips
Again these are just some of the things a thermal image scan may reveal. That is why we recommend regularly scheduled preventative maintenance inspections. Not only will we provide you with our thermal imaging scans but we also provide the following:
• Label all Power Distribution,
• Check wire size and fuses
• Check Motor Loads and Overload Protection
• Create a single line diagram
• Control Panel Inspection
• Breaker Panels
• Lighting panels
• Individual circuits
• GFI Breakers
• Arc Fault Breakers
• Power Distribution Inspection
• Software Back-Ups of PLC’s and HMI’s
To find out more about our preventative maintenance packages visit our Preventative Maintenance page here.
The Northeast blackout of 2003, that caused rolling brownouts and power disruptions affecting 55 million people in the US and Canada, brought to the forefront the critical dependence that we place on electrical power grid. Heightened awareness of Solar Storms that could cause power disruptions for as long as a month only create an added emphasis that the power we take for granted can disappear in the blink of an eye.
But for industry, the ramifications are further reaching. North America’s Industrial and Commercial businesses, rely on a constant source of power, and in turn use that power to feed the nation. Gone are the days of ample inventory and long lead times. Today’s industrial sector is Just-In-Time. In the event of any lengthy power disruption, unprepared companies will not be able to produce, and therefore sell their goods and services into the marketplace.
As with any disruption, preparation can minimize the potential impacts. Companies need to assess the risk they face by losing access to the grid. However, this needs to be done before any events occur.
Here are some questions companies should be asking themselves:
1. How long can remain open without power?
2. What types of contingencies do our suppliers have?
3. Where can I get help planning to avoid disruptions?
In many cases, temporary outages can be offset with temporary back-up power supply. These can range from very short-term, essential service back-up, to longer, ongoing power generators that use other sources of fuel to keep operations running.
But what should be done in the event that your company is caught unprepared. Ultimately the first responsibility in any commercial or industrial power outage is to ensure the safety of any individuals caught in the outage. This would require following established emergency procedures, which may include: taking attendance, meeting in designated areas, and determining the extent of the situation.
In the event of a prolonged outage, a company must determine what will be needed to get operations up and running as close to normal as soon as possible. A commercial and industrial electrical contractor may be your best friend in this scenario. Electrical contractors that offer emergency service will be able to determine your needs and be able to work with generator suppliers to get your company connected and producing goods and services once again.
The long-term lesson of the outage should not be lost in the immediacy of trying to restore power. An adequate assessment should be conducted to determine company requirements. Power outages will continue to occur in the future. By having a proper plan in place your company can continue to produce goods and services despite a lack of power from the grid.
As part of a multi-step process to phase out T12 lamps the US Department of Energy will prohibit them from being manufactured as of July 1st. That’s only 6 month away. If you have a facility full of T12 lamps – what are you going to do?
Prices for T12 lamps are expected to spike as supplies dwindle. Eventually you will have to make the switch to a different system (like T8 or T5) or you’ll be working in the dark. The news isn’t all bad. There is an ROI if you make the switch. According to the Energy Cost Savings Council the average savings when you switch to energy efficient lighting is 45% (a 1 to 3 year payback). In addition there is Federal assistance available (as part of the Energy Policy Act of 2005) that can give you a tax deduction, which can help you write off part of the cost of your lighting upgrade.
It gets even better. Several states and utility companies have financial incentive programs to help you further offset the cost of making the switch. But these incentives won’t last forever so the longer you wait to upgrade the less incentive money will be available to you. The clock is ticking. So call us and we can help you make the switch. To give you an idea of your potential savings you can check out our Energy Efficiency Savings Calculator here: www.thatsnew.com/services/energy-efficiency/
Posting tweet...